QuotedPartAnswers · Updated 2026-10-31
How do I quote laser cutting when the customer supplies the sheet?
Price one of your own parts: Drop a STEP model or PDF drawing — about 90 seconds, no account.
Your part priced in about 90 seconds, no account.
Charge receiving, verification, storage, nesting, cutting, cleanup, remnant handling, and material risk even when the customer buys the sheet.
See how QuotedPart connects to your workflow with its API, MCP server, autonomous quoting and shop-specific learning.
The direct answer
For ten customer-owned sheets, price unloading and inspection, marked storage, nesting loss, cut time, deburr, and remnant return. Record damage or shortage before cutting.
Test the decision against the shop evidence in this example: For ten customer-owned sheets, price unloading and inspection, marked storage, nesting loss, cut time, deburr, and remnant return.
Carry the measurable input from the worked case into the estimator's notes: For ten customer-owned sheets, price unloading and inspection, marked storage, nesting loss, cut time, deburr, and remnant return.
Evidence from a shop floor
Two supplied sheets with $37.50 receiving, $106.25 setup, $220 cutting, and $45 remnant handling produce a $408.75 service subtotal. Write who owns remnants and scrap, what happens to warped or wrong material, and when the schedule starts.
Keep the commercial decision tied to the evidence, including for ten customer-owned sheets, price unloading and inspection, marked storage, nesting loss, cut time, deburr, and remnant return.
The handoff is complete only when the owner can restate the route without losing for ten customer-owned sheets, price unloading and inspection, marked storage, nesting loss, cut time, deburr, and remnant return.
Build the quote route
Define material condition, quantity, ownership transfer, inspection acceptance, remnant policy, scrap responsibility, and packaging.
A useful review question is whether the current RFQ still matches this route: define material condition, quantity, ownership transfer, inspection acceptance, remnant policy, scrap responsibility, and packaging.
The next estimator should be able to challenge the assumption behind this route: define material condition, quantity, ownership transfer, inspection acceptance, remnant policy, scrap responsibility, and packaging.
Use the source notes to date the assumption and record why this route was selected: define material condition, quantity, ownership transfer, inspection acceptance, remnant policy, scrap responsibility, and packaging.
Release and learn
Customer-furnished material can be late, wrong, or unusable; keep a stop-work rule and document nonconformance.
If the buyer asks for a different outcome, explain the boundary in these terms: customer-furnished material can be late, wrong, or unusable; keep a stop-work rule and document nonconformance.
Before changing the total, verify whether the caveat applies: customer-furnished material can be late, wrong, or unusable; keep a stop-work rule and document nonconformance.
A customer-facing explanation should make the risk legible: customer-furnished material can be late, wrong, or unusable; keep a stop-work rule and document nonconformance.
Close the loop by noting the evidence that would make this estimate obsolete: customer-furnished material can be late, wrong, or unusable; keep a stop-work rule and document nonconformance.
Keep the commercial decision tied to the evidence, including for ten customer-owned sheets, price unloading and inspection, marked storage, nesting loss, cut time, deburr, and remnant return.
Price one of your own parts
Drop a PDF drawing or a STEP file. QuotedPart reads the print, measures the model and prices it in seconds, on default shop rates you can change.
Your STEP file or PDF drawingDrop a PDF drawing, a STEP file or both
Free. No account, no email. Priced at our default US rates until you set yours.
Related QuotedPart guides
Answers
Can I ship 10% more or fewer parts than ordered?
Only when the purchase order or customer has agreed a quantity tolerance; there is no universal right to ship ten percent extra or short.
Answers
Can I use Xometry or Protolabs instant quotes as a price check?
Use an instant quote as a dated comparison point after matching quantity, revision, finish, inspection, freight, and delivery scope; it is not a neutral market index.
Answers
Customer sent a STEP file but no drawing — what tolerance do I quote?
Use a written model-only default only when the customer accepts it; a practical example is to model with ±0.005 inch unless a drawing states otherwise, while calling out material, finish, threads, and inspection as open.
Answers
Customers make us re-enter quotes in their supplier portals — how do other shops handle it?
Treat portal re-entry as measurable quote administration: export the approved quote, time the work, and decide whether the effort is included or charged.